定制热线: 400-678-3556

电池专题

圆柱锂电池包的一些特点优劣之处表现

来源:宝鄂实业    2019-07-02 10:22    点击量:
The cylindrical 18560 battery in the cylindrical lithium battery pack is the most studied and the most fully discussed battery type. The monomer mainly consists of positive, negative, diaphragm, positive and negative collector, safety valve, over-current protection device, insulator and shell.
 
 
 
 
 
Although in the first half of this year, the capacity of cylindrical lithium battery packers is less than that of square lithium battery packs, with the development of some foreign electric vehicles, cylindrical lithium battery packs have also been advanced. Now let's talk about the advantages and disadvantages of cylindrical lithium battery packs.
 
 
 
 
 
Cylindrical cores, especially 18650, have the highest automation level among the three main types of cores due to their own structural characteristics and the standardization of their models. This makes it possible to achieve high consistency and to improve the yield accordingly.
 
 
 
 
 
Advantages of cylindrical lithium battery packs:
 
 
 
 
 
1. As mentioned above, monomer consistency is good.
 
 
 
 
 
2. The mechanical properties of the monomer are good. Compared with the square and soft-packed batteries, the closed cylinder with approximate size can obtain the highest bending strength.
 
 
 
 
 
Third, the technology is mature and the cost is low, but at the same time, the space of cost optimization has been consumed almost.
 
 
 
 
 
4. The energy of the monomer is small and the form is easy to control when an accident occurs.
 
 
 
 
 
Advantages of cylindrical lithium battery packs:
 
 
 
 
 
First, in the context of electric vehicles, the number of cylinder cells in battery system is very large, which makes the complexity of battery system greatly increased. Compared with the other two types of batteries, the cost of system-level cylinder batteries is higher.
 
 
 
 
 
Secondly, under the condition of non-uniform temperature environment, the probability of a large number of core characteristics alienation increases.
 
 
 
 
 
3. There is little room for energy density to rise.
 
 
 
 
 

The advantages and disadvantages of cylindrical lithium battery pack are obvious, but since cylindrical lithium battery pack can be seen in today's environment, it means that it can also be improved, and has great potential. Now larger diameter cylindrical lithium ion has become an inevitable trend. The development of cylindrical lithium battery packs will also stimulate the development of other lithium battery packs. Different types of lithium battery packs have their own advantages and disadvantages. The most important thing is to select the right product according to their own needs.圆柱锂电池包中圆柱18560电池,是被研究的最多,技术讨论最充分的电池品种。单体主要由正极,负极,隔膜,正极负极集电极,安全阀,过流保护装置,绝缘件和壳体共同组成。

 

虽然在今年上半年圆柱锂电池包装机量比不过方形锂电池包,但是随着国外的一些电力汽车的发展,圆柱锂电池包也得到了进阶发展。下面我们来谈一谈圆柱锂电池包的一些特点优劣之处吧。

 

圆柱电芯,尤其18650,由于其自身结构特点,也由于其型号的标准化,圆柱电芯生产的自动化水平,在3种主要电芯形式中为最高。这就使得高度一致性成为可能,成品率相应得到提高。

 

圆柱锂电池包优势之处:

 

一、如前面所述,单体一致性较好;

 

二、单体自身力学性能好,与方形和软包电池相比,封闭的圆柱体,近似尺寸下,可以获得最高的弯曲强度;

 

三、技术成熟,成本低,但同时,成本优化的空间也已经消耗的差不多;

 

四、单体能量小,发生事故时,形式易于控制。

 

圆柱锂电池包劣势之处:

 

一、在电动汽车这个语境中,电池系统的圆柱单体数量都很大,这就使得电池系统复杂度大增,无论机构还是管理系统,相对于其他两类电池,系统级别的成本圆柱电池偏高;

 

二、在温度环境不均匀条件下,大量电芯特性异化的概率上升;

 

三、能量密度的上升空间已经很小。

 

圆柱锂电池包优势与劣势都很明显,不过圆柱锂电池包既然能在当今环境下被看中,就意味着它还能改进,还有着不小的潜力,现在更大直径圆柱锂离子已经成为了必然趋势。圆柱锂电池包的发展也会刺激其他锂电池包产品的发展,不同类型的锂电池包各有各的优势之处,对比其优劣之处,再结合自身的需求,选择合适的产品才是最重要的。

円筒状リチウム電池パックの中で、円筒形1860電池は最も多く研究されており、最も技術的に検討されている電池の種類です。単体は主に正極、負極、隔膜、正極負極コレクタ、安全弁、過流保護装置、絶縁部品とハウジングから構成されています。
 
 
 
 
 
今年の上半期は円筒形のリチウム電池の包装機の量は四角形のリチウム電池の包みに比べられませんでしたが、しかし国外のいくつかの電気自動車の発展に従って、円柱のリチウムの電池の包みも進級を得ました。次に円柱状のリチウム電池パックの特徴と優劣について話しましょう。
 
 
 
 
 
円筒状の電気芯、特に18650、その自身の構造の特徴のため、その型番の標準化のため、円柱の電気芯の生産の自動化のレベル、3種類の主要な電気芯の形式の中で最高です。これは高い整合性を可能にし、歩留まりを向上させる。
 
 
 
 
 
円柱状リチウム電池のパック優勢:
 
 
 
 
 
一、前に述べたように、単体の一致性が良い。
 
 
 
 
 
二、単量体自体の機械的性質が良く、四角形とソフトパック電池と比べて、密封された円筒、近似サイズで最高の曲げ強度が得られます。
 
 
 
 
 
三、技術が成熟していて、コストが低いですが、同時に、コスト最適化の空間もすでに消耗したのと同じです。
 
 
 
 
 
四、単体のエネルギーが小さく、事故が発生した時、形式は制御しやすい。
 
 
 
 
 
円柱リチウム電池パックの劣勢点:
 
 
 
 
 
一、電気自動車という文脈において、電池システムの円柱単量体の数はとても大きいので、電池システムの複雑度が大きくなります。機構や管理システムに関わらず、他の二種類の電池に比べて、システムレベルのコストは円柱電池が高いです。
 
 
 
 
 
二、温度環境が不均一な条件下で、大量の電気芯特性が異化する確率が上昇する。
 
 
 
 
 
三、エネルギー密度の上昇空間はすでに小さい。
 
 
 
 
 
円柱状のリチウムイオンのパックの利点と劣勢は明らかだが、円柱状のリチウムイオンパックは現在の環境で注目されている以上、さらに改善される可能性があり、さらに大径の円柱状のリチウムイオンは必然的な傾向となっている。円柱状のリチウム電池パックの発展は他のリチウム電池パックの発展をも刺激します。各タイプのリチウム電池パックはそれぞれ長所があり、その優劣を比べて、自分の需要に合わせて、適切な製品を選ぶことが一番重要です。